The SAWSHARK Chain Series
TOOLGAL SAWSHARK Chain is made of engineered diamond for absolute best performance in a variety of cutting applications.
|Great White||-||Ideal chain for most applications.|
|Blue Shark||-||For the most demanding applications. Very hard aggregate. Heavy reinforced steel.|
|Tiger Shark||-||Classic abrasive chain. Excellent speed and life, in all abrasive material.|
|Segment on Every Link|
|2||More torque can be placed on chain and bar due to less spacing.|
|3||Gives greater life – up to 30% more surface area.|
|4||Chain stretching is reduced because of pressure on each segment is lower.|
|5||Cuts significantly faster when cutting through heavy reinforced concrete. More diamonds in contact with the material.|
Smoother Cutting & Less Vibration to the operator
“CLT ^TM” “Continuous Link Technology” diamond grinding – no jumping of the chain from missing segments.
|1||Unique sandwich segment design maintains segment profile throughout chain life|
|2||The sandwich design has harder outer shell that keeps the segment’s profile throughout its life. The use of a soft bond in the center enables fast cutting, especially in heavy steel.|
|3||Allowed the segment work all the way.|
|4||Only top quality diamonds are used in the bond which increases speed and life.|
OPEN SEGMENTS- Toolgal chain is surface ground during the production, so the operator can start cutting immediately our of the box. (In competitor’s chain it can take more than 20 minutes to open the segment, even in abrasive material).
|1||The basic concept is using a hardened internal bushing between the links and the drive link.|
|2||The link is very stable and slows down the elongation of the chain. The special hardening process prevents excessive guide bar wear.|
|3||The assembly and disassembly is very easy using Toolgal chain assembly kit. An operator can easily remove a broken link and replace it within minutes.|
|4||A special hole on the bottom of the drive link enable better cooling when water supply is reduced.|